|Keterangan:||Beta 58A Vocal Microphone The Shure Beta 58A® is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close– up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. * Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect * Uniform supercardioid pattern for high gain before feedback and superior rejection of off– axis sound * Neodymium magnet for high signal– to– noise output * Hardened steel mesh grille that resists wear and abuse * Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration * Minimally effected by varying load impedance * Legendary Shure quality and reliability Type Dynamic ( moving coil) Frequency Response 50 to 16, 000 Hz view larger NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position. Polar Pattern Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level ( at 1, 000 Hz) Open Circuit Voltage: -51.5 dBV/ Pa* ( 2.6 mV) * 1 Pa = 94 dB SPL Impedance Rated impedance is 150 ohms ( 290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Case Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille. Adjustable, Stand Adapter Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/ 8 " -27 thread, black finish. Dimensions See User Guide. Net Weight 278 grams ( 9.92 oz) A25D Microphone Clip Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/ 4-inch and larger handles to a standard microphone stand. A55HM Snap-in " Shock Stopper " Mount Shock Stopper Isolation Mount/ Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic. A55M Shock Mount Microphone Clip Isolation mount and swivel adapter securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, and Beta87C to standard microphone stands. R176 Cartridge for Beta 58A Direct replacement cartridge for Shure Model Beta 58A supercardioid dynamic microphones. RK265G Factory Original Beta 58A Replacment Grille Factory original dent-resistant replacement grille for Shure Beta58A wired microphones and wireless transmitters. A58WS Microphone Windscreen Reduces unwanted breath and wind noise. For use with all larger Shure “ ball-type” microphones including the SM58, Beta58A, SM48, and the 565SD. Available in 6 colors; black, blue, gray, green, red, and yellow. User Guide English 359 KB PDF Quick Links * FAQ' s for Beta 58A * * Beta Microphones * See also SM58, Beta 87A, Beta 87C * Shure Home | * Product Registration | * Careers | * Privacy & Security | * Legal | * Site Map | * Site Feedback | * Corporate.|
Fungsi: Untuk Karaoke, Gereja, Band, Hall, Meeting Dll.